APPENDIX 1: SHIPMENT INSPECTION PATTERN 1
Check item 1 (Non-ejection of ink): Total area of the sample below
BK nozzle check pattern
Check item 3 (Gray area)
Check item 4 (Vertical lines)
<EEPROM information print>
Model name
ROM version
IP1500 P=V X.XX Dd=XXX.X Ds=XXX.X Page=XXXX
BL=XXXX YY YY YY YY USB= (YYYYYY)
(A)
Main ink absorber
waste ink amount (%)
Dd=XXX.X Ds=XXX.X Page=XXXX PL=XXXX , PR=XXXX , CA=XXXX , BL=XXXX
SettingTime=XXXX / XX / XX XX:XX
(B)
EEPROM information print (A)
-> See below for details.
C nozzle check pattern 5pl
C nozzle check pattern 2pl
EEPROM information print (B)
-> See below for details.
Paper size: A4
Platen ink absorber
waste ink amount (%)
Installation time
Check item 2 (Top of form)
M nozzle check pattern 5pl
M nozzle check pattern 2pl
(21/23)
Y nozzle check pattern 5pl
Y nozzle check pattern 2pl
Number of sheets fed
Page: Total
PL:
Plain paper
PR:
PR-101, PP-101, MP-101
CA:
Postcard, inkjet postcard,
glossy photo card
BL:
Borderless printing (counted
separately from the count by
paper type)
Need help?
Do you have a question about the Pixma iP1600 Pixma iP1200 and is the answer not in the manual?