Appendix 1: Shipment Inspection Pattern - Canon PIXMA MP150 Service Manual

APPENDIX 1: SHIPMENT INSPECTION PATTERN 1

<EEPROM information contents>
On the service test print(sample below), confirm the EEPROM information as shown below. (The information
Is given in the upper portion of the printout.)
MPxxx xxx M=Vx.xx
LEDTIME=xxxx xxxx xxxx
<Print check items>
On the service test print(sample below),confirm the following items.
-Check 1,nozzle check patten: Ink shall be ejected from all nozzles.
-Check 2,top of form accuracy: The line shall not extend off the paper.
-Check 3,vertical straight lines: The line shall not be broken.
<Service Test print sample>
Destination(model name)
Rom version
Main Ink absorber waste ink amount(%)
Dd=xxx.x Ds=xxx.x
SELF(H=xxx xxx xxx L=xxx xxx xxx)
Scanner Self check
LEDlight control (Print result of LED TIME)
(22/24)
Platen Ink absorber waste ink amount(%)
Reserved for factory use
USB serial number
xx xx xx xx USB(XXXXXX)
Check 2. Top pf form accuracy
Check 1. Nozzle check pattern
Check 3. Vertical straight lines