Brother MFC-L8600CDW User Manual page 72

Chapter 7
Turning on the Remote Codes
You must turn the Remote Codes setting to
On to use the Remote Activation Code and
Remote Deactivation Code.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Remote Codes.
h
Press Remote Codes.
i
Press Remote Codes.
j
Press On.
k
If you do not want to change the Remote
Activation Code, press
Touchscreen.
l
Press .
62
Changing the Remote Codes
7
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you are always disconnected
when accessing your External TAD, try
changing the three-digit remote codes, for
example ### and 555.
a
b
c
d
e
f
g
h
i
on the
j
Press .
Press All Settings.
Swipe up or down, or press a or b to
display Fax.
Press Fax.
Swipe up or down, or press a or b to
display Setup Receive.
Press Setup Receive.
Swipe up or down, or press a or b to
display Remote Codes.
Press Remote Codes.
Do one of the following:
 If you want to change the
Remote Activation Code, press
Act.Code. Enter the new code, and
then press OK.
 If you want to change the
Remote Deactivation Code, press
Deact.Code. Enter the new code,
and then press OK.
 If you do not want to change the
Codes, go to step j.
If you want to turn the Remote Codes

On or Off, press Remote Codes.
Press On or Off.
Press .
7