Brother MFC-L8600CDW User Manual page 144

Error Message
1
Replace Toner
1
The Touchscreen
indicates the toner
cartridge colour that
you must replace.
BK=Black, C=Cyan,
M=Magenta, Y=Yellow
Replace WT Box
Scan Unable
Self-Diagnostic
Short paper
Size Error
Size Error
2-sided
134
Cause
The toner cartridge is at the
end of its life. The machine will
stop all print operations.
While memory is available,
faxes will be stored in the
memory.
It is time to replace the waste
toner box.
Document is too long for
2-sided scanning.
The machine has a mechanical
problem.
The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
The fuser unit is too hot.
The length of the paper in the
tray is too short for the machine
to deliver it to the face-down
output tray.
The paper size defined in the
printer driver is not supported
by the defined tray.
The paper size defined in the
printer driver and the
Touchscreen menu is not
available for automatic 2-sided
printing.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Action
Replace the toner cartridge for the colour
indicated on the Touchscreen (see Replacing
the toner cartridges on page 83).
Replace the waste toner box (see Replacing
the waste toner box on page 100).
Press . Use the appropriate size of paper
-
for 2 sided scanning (see Print media
on page 232).
 Press and hold down
machine off, and then turn it on again
(see Transferring your faxes or Fax Journal
report on page 136).
 If the problem continues, contact Brother
customer service for support.
Press and hold down
off, wait a few seconds, and then turn it on
again. Leave the machine idle for 15 minutes
with the power on.
Open the back cover (face-up output tray) to let
the printed page exit onto the face up output
tray. Remove the printed pages and then press
Retry.
Choose a paper size which is supported by
each tray (see Paper type and size
on page 33.)
Press . Choose a paper size that is
-
supported by 2 sided printing.
The paper size you can use for automatic
-
2 sided printing is A4.
Load the correct size of paper in the tray and
set the size of paper for the tray (see Paper
Size on page 30).
The paper size you can use for automatic
-
2 sided printing is A4.
to turn the
to turn the machine