Replacing The Belt Unit - Brother MFC-L8600CDW User Manual

m
When you replace the drum unit with a
new one, you must reset the drum
counter. Instructions of how to do this
can be found in the box your new drum
unit came in.
Routine maintenance

Replacing the belt unit

Model name: BU-320CL
A new belt unit can print approximately
50,000 (5 pages per job) or 20,000 (1 page
per job) A4 or Letter size single-sided
1
pages.
1
Belt unit life is approximate and may vary by type of
use.
Belt End Soon
If the Touchscreen displays Belt End
Soon, it means the belt unit is near the end of
its life. Buy a new belt unit and have it ready
before you get a Replace Belt message.
To replace the belt unit, see Replacing the
belt unit on page 95.
Replace Belt
When the Replace Belt message appears
on the Touchscreen, you must replace the
belt unit.
When you replace the belt unit with a new
one, you must reset the belt unit counter.
Instructions of how to do this can be found in
the box your new belt unit came in.
IMPORTANT
• DO NOT touch the surface of the belt unit.
If you touch it, it could decrease print
quality.
• Damage caused by incorrect handling of
the belt unit may void your warranty.
Replacing the belt unit
a
Make sure the machine is turned on.
A
A
A
A
A
95