16. Paper Feed Motor Assy
17. Paper Path Change Plate
GENERAL SPECIFICATIONS
(1)
Remove
Platen assy as described in section 15.
Two screws [1]
Paper feed motor assy [2]
(1)
Remove
Paper feed roller A as described in section 12.
Right stop ring [1]
Right release shaft [2]
Push inwards.
Left release shaft [2]
Pull the shaft outwards until the slot is exposed.
Paper path change plate [3]
Note:
Align the " " mark on the paper path change plate
with the " " mark on the release gear.
– 43 –