Print Head - Star Micronics LC-8211 Technical Manual

GENERAL SPECIFICATIONS
7.

Print Head

Note:
Fold the head cables according to the dimensions shown below.
0.5 0.5
163 1
Double-sided tape
85 0.5
(1) Remove
Front case unit as described in section 1.
Two screws [1]
Cable [2]
Print head [3]
WARNING
The print head gets hot after printing.
Do not touch it until it cools.
(2) Adjust
Gap between print head and platen. Refer to
section 1 of Chapter 3.
Head cable L
Head cable S
– 38 –
19 1
10 1
Cat size(Double-sided tape)
Size: mm