16. Paper Feed Motor Assy
17. Paper Path Change Plate
(1)
Remove
Platen assy as described in section 15.
• Two screws [1]
• Paper feed motor assy [2]
(1)
Remove
• Paper feed roller A as described in section 12.
• Right stop ring [1]
• Right release shaft [2]
Push inwards.
• Left release shaft [2]
Pull the shaft outwards until the slot is exposed.
• Paper path change plate [3]
Note:
Align the "∆" mark on the paper path change plate
with the "∆" mark on the release gear.
– 43 –