Video Processor Pcb - Hughes JVC 100 Service Manual

Chapter 2---System Description
Video Processor I/O
This section provides a comprehensive description of the inputs to and outputs
from the Video Processor PCB. The I/O descriptions in Table 2-7 are arranged by
the source/destination of the signal. The format used is such that the assembly
communicated with is used as the primary heading of each group of signals. Those
signals are further subdivided into inputs and outputs. Inputs refers to an input to
the Video Processor PCB, while output refers to an output from the Video
Processor PCB.
Table 2-7 Video Processor I/O signals

Video Processor PCB

2.4 Input
s
+15V
Model 100 Service Manual
Figure 2-12 Video Processor I/O Diagram.
Description
Power for analog circuitry.
2-25