Backplane Pcb - Hughes JVC 100 Service Manual

Chapter 2---System Description

Backplane PCB

The Backplane PCB is the interface that connects the Power Supplies, VICs,
PCBs, and other components together, either through a direct connection to a
connector on the Backplane or through cables to connectors on the Backplane
PCB. Signals are not modified in any way by the Backplane. It serves only as an
interconnecting point. Refer to Figure 2-20 for a general idea of how the projector
wiring is interconnected through the Backplane PCB.
Model 100 Service Manual 2-49