Connecting To Video Devices; Connecting To Hi-Vision Devices - Hughes JVC G1500 Instructions Manual

D-ila digital graphics projector
Table of Contents

Advertisement

Available languages

Available languages

Connecting to Various Devices (Cont.)

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.
• Read the manual which comes with each video device thoroughly.
• Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.
To Y/C
BNC-RCA conversion plug (accessory)
Y/C
VIDEO
AUDIO
Y
Y
L
R
P
/B-Y
B
P
/R-Y
R
REMOTE
AUDIO OUT
RS-232C
To select the proper audio input for video input
The video input terminal (AV IN input terminal) can
be switched with the VIDEO button. However, since
this projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.
• Read the manual which comes with each Hi-Vision device thoroughly.
• Use separately available BNC cables and audio cables to connect Hi-Vision devices.
Y/C
VIDEO
AUDIO
Y
Y
L
R
P
/B-Y
B
P
/R-Y
R
AUDIO OUT
REMOTE
RS-232C
To select the proper audio input for video input
The video input terminal (AV IN input terminal) can
be switched with the VIDEO button. However, since
this projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.
20
S video cable
(separately available)
To VIDEO
To AUDIO (L)
AV connection
cable
To AUDIO (R)
(accessory)
• When connecting a video device, use a TBC along with it, or one
• Use of an extension cable to connect a video device and the
• When a signal with much jitter is reproduced on a VCR or special-
To AUDIO (R)
To AUDIO (L)
Audio cable
(separately available)
To VIDEO
To Y
To P
/B-Y
B
To P
/R-Y
R
BNC cable (separately available)
• Other devices with component signal output terminals (DVD player
• DTV-format signals (480i, 480p,720p,1080i) can be input. For DTV-
Video devices
• VCR (Video Cassette recorder)
• Laser video disc player
• Camcorder
Memo
which has a built-in TBC.
projector could cause video degradation.
effect playback is performed, the upper part of the picture or the
picture itself may be erased or distorted.
Hi-Vision devices
• W-VHS VCR
• Text/video camera
• Hi-Vision video camera
Memo
(NTSC), etc.) can be connected. (*DVD: Digital Video Disc)
format signals that can be handled, refer to page 56.

Advertisement

Table of Contents
loading

Table of Contents