Table of Contents
Advertisement
MAINTENANCE AND LUBRICATION
2.
Lubrication
Lubrication is very important to maintain optimum performance and to prevent trouble.
2-1. Lubricant
The type of lubricant greatly affects the performance and durability of the printer, especially in a low temperature
environment. We recommend use of the grease and lubrication oils listed below for this printer
Product name
FLOIL GB-TS-0 and FLOIL GB-100
KF96-1000CS and KF96-SP
Mobil 1
2-2. Lubricating Method
When lubrication is carried out in assembly and disassembly, wash parts well to remove dust and dirt before lubrication.
Lubrication must be carried out regularly once every 6 months or after 1 million lines have been printed. Lubrication is
necessary irrespective of the regular lubrication whenever lubricant becomes deficient after cleaning or whenever parts
have been disassembled or replaced.
2-3. Lubricated Areas
NO.
[1]
Rubbing surfaces of idler gear 16
[2]
Rubbing surfaces of gear 40 0.5 and gear shaft
[3]
Rubbing surfaces of index lever and frame
[4]
Rubbing surfaces of timing pulley and pulley shaft
[5]
Rubbing surfaces of rear angle and carriage
[6]
Rubbing surfaces of bushing and carriage stay
[7]
Rubbing surfaces of timing pulley and stop ring
[9]
Rubbing surfaces of release lever and tractor shaft
[10]
Rubbing surfaces of two tractor bushings and tractor shaft
[11]
Rubbing surfaces of tractor holder and tractor cover
[12]
Rubbing surfaces of bail roller and shaft
[13]
Rubbing surfaces of timing pulley and pulley bushing
[14]
Rubbing surfaces of lift cam and ribbon change lever
[15]
Rubbing surfaces of lift cam and carriage shaft
[16]
Rubbing surfaces of ribbon change lever and carriage
[17]
Rubbing surfaces of idler assy TRX and gear cover
[18]
Rubbing surfaces of lift lever assy and carriage shaft
[19]
Rubbing surfaces of lift lever assy and carriage
[20]
Rubbing surfaces of lift lever assy and lift cam
[21]
Rubbing surfaces of ribbon cassette gear and carriage shaft
[22]
Rubbing surfaces of rear angle and idler assy TRX
[23]
Rubbing surfaces of idler gear assy 711 and carriage shaft
[24]
Rubbing surfaces of idler assy 711 and gear cover
[25]
Rubbing surfaces of idler gear 17
[26]
Rubbing surfaces of idler assy TRX and carriage shaft
[27]
Rubbing surfaces of lift cam and gear cover
[28]
Rubbing surfaces of wave washer and poly-slider
[29]
Rubbing surfaces of paper chute and roller holder
[30]
Rubbing surfaces of release shaft and roller holder
[31]
Rubbing surfaces of release shaft and frame
Maker
Kanto Chemicals Co., Ltd.
Shinetsu Chemical Industry
Mobil oil
Lubrication
72 0.5 and idler gear shaft
41 0.3 and clutch lever
– 42 –
Product Name
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
Mobil 1
GB-TS-0
GB-TS-0
GB-TS-0
KF96-1000CS
KF96-SP
GB-100
GB-TS-0
GB-TS-0
KF96-1000CS
GB-TS-0
KF96-1000CS
GB-TS-0
KF96-1000CS
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
Advertisement
Chapters
Table of Contents
Troubleshooting
