PARTS REPLACEMENT
7. Print Head
8. Carriage Motor Unit
(1)
Remove
Printer cover
Ink ribbon cartridge
Connector cover [1]
Color ribbon holder [2]
Two tapping screws [3]
Head cable [4]
Print head [5]
WARNING
The print head gets hot after printing.
Do not touch it until it get cool.
(2)
Adjust
Gap between print head and platen.
Refer to item 1 of chapter 3.
(1)
Remove
Upper case unit according to the procedure
described in item 1.
Cord fastener binding the lead wires.
Connector [1]
Two screws [2]
Carriage motor unit [3]
– 36 –