Checking Assignment Of Room Names; Displaying Faults - Honeywell HCE 60 Installation And Operation Manual

Assigning zones and issuing room names

Checking assignment of room names

Change setpoint temperature at Hometronic Manager (see instruc-
►
tions of Hometronic Manager)
LEDs 1 through 8 of the assigned zone flash up to three times.
The assignment is correct.
The storey controller exits the device display after approx. 60 seconds
and returns to normal mode.

Displaying faults

If the LED illuminates, a fault is present in at least one tempera-
ture zone.
Press Fault button
►
The LED flashes red. The storey controller switches to the
fault display.
42
.