Saving Settings On Hometronic Manager; Checking Configuration - Honeywell HCE 60 Installation And Operation Manual

Assigning zones and issuing room names
Select the "Heating" submenu and
►
press the Input button.
A list of the assigned room names
(temperature zones) appears in the
display:
Select room name (in this case,
►
Living) and press the Input button.
The * symbol after the room name
disappears:
The assignment is deleted and can be reassigned.

Saving settings on Hometronic Manager

Before start-up is completed, the settings at the Hometronic Manager
must be saved.
For information on saving settings, refer to the operating instructions
of the Hometronic Manager in the chapter entitled "Adaptation".

Checking configuration

Press Installation button
►
The LED flashes yellow.
The storey controller is in the device display.
The colors of LEDs 1 through 8 indicate the configuration of the tem-
perature zones.
40
LIVING
DINING
KITCHEN
BEDROOM
LIVING
DINING
KITCHEN
BEDROOM
briefly.
*
*
*
*
*
*
*