Setting handset/base
station
The handset and base station are preset,
but you can change these settings to suit
your individual requirements. You will find
the relevant functions in the submenus
¢
Settings
and
§Menu§
(page 13).
tings
The base station settings are carried out
using a registered Gigaset C45 handset.
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only adjust the loud-
speaker volume during a call.
You are conducting an external call.
t
Press the control key.
q
Adjust the volume and press
.
§OK§
Please note:
The handsfree volume can only be adjusted
when this function is set.
If t is assigned a different function, e.g.
toggling:
Open menu.
§Menu§
Select and press
Volume
Make settings (see above).
¢
Audio Set-
§Menu§
.
§OK§
Setting handset/base station
Setting the ringer volume
The ringer volume is the same for all types
of ring.
¢
Audio Settings
§Menu§
Or in idle status:
t
Press briefly.
Then:
q
Adjust the volume and press
.
§OK§
a
Press and hold (idle status).
Activating/deactivating the ringer tone
You can turn off the ringer tone on your
handset before you take a call or while the
phone is in idle status. You can take a call
so long as it is displayed on the screen.
Deactivating the ringer tone
P
Press the star key and hold
until the Ú icon appears in the
display.
Re-activating the ringer tone
P
Press and hold the star key in
idle status.
Activating/deactivating advisory
tones
¢
Audio Settings
§Menu§
Select and press
All advisory tones are activated or deacti-
vated.
¢
Ringer Volume
¢
Advisory Tones
(‰ = on).
§OK§
23