Table of Contents
Advertisement
A more detailed explanation of the function of each button appears in Section 3.5.
To develop a feel for navigating between modes, power up the instrument and perform the sequence of
steps that follows.
Upon powering up the instrument for the very first time, the logo display will initially appear. Press the
Menu button several times until the ON LINE, PROGRAM, or MAINTENANCE mode MAIN MENU is
displayed. Refer to Figure 3-2. Note: Menus are shown with all possible options; your menu may not
have all options.
PRODUCT
INFO
S / N YXX XX X XX XX XXX XX X
PA R T N U M B ER 46900052-001
VE R SIO N X .X
Product Info Display
MAIN MENU - ONLINE
MAIN MENU - PROGRAM
MAIN MENU - MAINTENANCE
Figure 3-2 Menu Navigation Guide Through ON LINE, PROGRAM, and MAINTENANCE
Once you have established which MAIN MENU you are on, use the Up Arrow and Down Arrow buttons
to verify each MAIN MENU choice as indicated in Figure 3-2.
Use the Up Arrow and Down Arrow buttons to find and highlight the menu's SET MODE prompt.
When the SET MODE prompt is highlighted, press the Enter button.
Use the Up Arrow or Down Arrow buttons to switch the instrument to one of the other two instrument
modes and press the Enter button.
SETMODE ONLINE
DATA STORAGE
REVIEW PROGRAMMING
SET ANALOG OUTPUTS
PROGRAM
LABELS
SETMODE
CALCULATED VALUES
DISCRETE OUTPUTS
ALARMS
TOTALIZERS
SERIAL COMMUNICATIONS
SECURITY
COPY BLOCK
CLOCK
SETMODE MAINTENANCE
CALIBRATE ANALOG INPUTS
MAINS FREQUENCY
PRODUCT INFORMATION
WARM START TIME
mode MAIN MENUs.
Video Recorder – User Manual
Programming and Operating Concepts
ACCESS SUMMARIES
DATA ENTRY
TUNE LOOP
SETPOINT PROFILES
ANALOG INPUTS
CONTROL LOOPS
DISCRETE INPUTS
ANALOG OUTPUTS
PROFILERS
CONSTANTS
FEATURES
DISPLAYS
LOAD/STORE CONFIG
SCAN RATE
LANGUAGE
CALIBRATE ANALOG OUTPUTS
RESET UNIT
DEMO
OFF-LINE DIAGNOSTICS
DATABASE SERVICES
37
Advertisement
Table of Contents
