Alarm Output Port - Honeywell HD-DVR-1004 User Manual

Installation and Connections

Alarm Output Port

Model
Material of the touch
Rating (Resistance
Load)
Insulation
22
Use the same ground with that of DVR if you use external power for the
alarm device.
Only indoor devices are recommended for being connected
to HD-DVR-1004 / HD-DVR-1008 /HD-DVR-1016 alarm
Note
inputs.
Figure 3-2 Sample of Alarm Input (Normal Close Type)
•
Three ways to relay alarm output (NO contact). External power supply
is needed for external alarm device.
•
To avoid overloading, please read the following relay parameters sheet
carefully.
Relay Specification:
JRC-27F
Silver
Rated switch capacity
Maximum switch power
Maximum switch voltage
Maximum switch currency
Between touches with same polarity
30VDC 2A, 125VAC 1A
125VA 160W
250VAC, 220VDC
1A
1000VAC 1minute