Honeywell HD-DVR-1004 User Manual page 152

Web Client Operation
138
Please refer to the following sheet for detailed information.
Parameter Function
Channel You can select monitor channel from the dropdown list. .
Protocol Select the corresponding dome protocol (such as PELCOD),
Set corresponding dome address. Default value is 1. Please
Address note your setup here shall comply with your dome address;
otherwise you cannot control the speed dome.
Baud Rate Select the dome baud rate. Default setup is 9600.
Default setup is 8. Please set according to the speed dome dial
Data Bit
switch setup.
Default setup is 1. Please set according to the speed dome dial
Stop bit
switch setup.
Default setup is none. Please set according to the speed dome
Parity
dial switch setup.
You can click the save button after you complete setup for one
Save channel, or you can complete the whole setup and then click
the save button.
Click this button to get the device's latest configuration
Refresh
information.
Default & Backup
Default: Restore the factory default settings. You can select corresponding
items.
Backup: Export current configuration to local PC or import configuration
from current PC.
Please refer to Figure 6-42
some information such as the network IP address.
Please note that the system cannot restore