Honeywell HD-DVR-1004 User Manual page 141

Network
The network interface is shown as in
Figure 6-33 The Network Setup Menu
Please refer to the following sheet for detailed information.
Parameter
Ethernet
DHCP
TCP Port
HTTP Port
Max Connection
Remote
PPPOE
Host
Figure 6-33.
Function
Please select the network card first.
Dynamically get IP address. You can get the device
IP from the DHCP server if you enabled this function.
Default value is 37777.
Default value is 80.
Network user max amount. The value ranges from 0
to 10.
0 means there is no user can access current device.
Input the PPPoE user name and password you get
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.
Honeywell
127