Schedule; Schedule Menu - Honeywell HD-DVR-1004 User Manual

Schedule

Schedule Menu

Figure 4-11 Sample of the Calendar
After the system has booted up it will enter a default 24-hour regular mode.
You can set the record type and time in schedule interface.
In the main menu, from Setting to Schedule, you can go to the schedule
menu. See Figure 4-12
You can select "all" if you want to set for all of the channels.
•
Week day: There are eight options ranging from Saturday to Sunday
and the entire week.
•
Pre-record: System can pre-record the video before the event triggers
recording. The value ranges from 1 to 30 seconds. But the actual pre-
record length depends on total channel number with pre-record
enabled and the bit rate of video stream. When pre-record is enabled in
all channels, actual pre-record length of each channel can be no less
than 4 seconds.
•
Redundancy: save the record of the selected channel in two hard
disks. Please refer to
•
Record types: There are four types: regular, motion detection (MD),
alarm, motion detection and alarm.
Regular: The device will record in the selected time.
Channel: Please select the channel number first.
Redundancy for more details.
Honeywell
35