Honeywell HD-DVR-1004 User Manual page 160

Web Client Operation
146
Abnormity
The abnormity interface is shown as below.
Figure 6-49 The Abnormity Setup Menu
Please refer to the following chart for detailed information.
Parameter Function
Possible abnormal errors include: no disk, disk no space, disk
error, net error.
Event Type
You need to draw a circle to enable this function.
The corresponding alarm activation output channel when alarm
Alarm Out
occurs, There are three channels.
The alarm output can be delayed for the specified time after the
alarm
Latch
corresponding activation output.
The value ranges from 10s to 300s.
If you enable this function, the system can send out an email to
Send email
notify the specified user.
Show The system can display alarm information in the local DVR
stops. Then the system disables alarm and