Honeywell HD-DVR-1004 User Manual page 148

Web Client Operation
134
Parameter Function
Enable alarm activation function. You need to select alarm
Alarm Out output port so that the system can activate corresponding alarm
device when alarm occurs.
Alarm System can delay the alarm output for specified time after alarm
Latch ended. The value ranges from 10 seconds to 300 seconds.
System auto activates current channel to record once alarm
occurs (working with alarm activation function). Please note
Record
Channel current device shall be in auto record mode (see
Detection
Record System can delay the record for specified time after alarm
Latch ended. The value ranges from 10s to 300s.
Enable email function. System can send out email to alert you
Send Email
when alarm occurs and ends.
Display video in local monitor window by tour. If there are
Tour record channels selected, only the record channels will be
displayed in the tour.
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
PTZ
activation
The PTZ configuration events include preset, auto-tour, and
pattern.
It is a menu shortcut button. You can copy the current channel
Copy
setup to one or more (all) channels.
You can click the save button after you complete setup for one
Save channel, or you can complete the whole setup and then click
the save button.
Click this button to get the device's latest configuration
Refresh
information.
Detect
Analyzes the video. The system enables the motion detection alarm when it
detects the motion reaches the specified sensitivity.
The detection interface is shown as in
and Manual Record).
Figure 6-39.
Motion