Touch Sharing] - Panasonic Lumix DMC-GH4 Owner's Manual

10. Using the Wi-Fi/NFC Function

[Touch Sharing]

[Wi-Fi Password]
•
For details on how to enter characters, refer to
•
Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu,
however other settings will also be reset. (excluding [LUMIX CLUB])
[Network Address]
•
A "MAC Address" is a unique address that is used to identify network equipment.
•
"IP address" refers to a number that identifies a PC connected to a network such as the
Internet. Usually, the addresses for homes are automatically assigned by the DHCP function
such as a wireless access point. (Example: 192.168.0.87)
[Approved
¢
Regulations]
¢ [Approved Regulations] is only available on the version DMC-GH4P.
Sets the camera operation after the connection with the NFC
function is complete.
[ON]:
When a Wi-Fi connection is complete by using the NFC function
during single picture playback, the single picture can be
transferred.
[OFF]
To prevent incorrect operation or use of the Wi-Fi function by a
third party and to protect saved personal information, it is
recommended that you protect the Wi-Fi function with a
password.
Setting a password will automatically display the password input
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password.
[Delete]
Displays the MAC address and IP address of this unit.
Displays the certification number for radio regulations.
303
" "
Entering Text section on P57.