4.
Focus and Shutter (Drive Mode) Settings
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
∫
Bracket
1
Select the menu.
>
MENU
2
Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press [MENU/SET].
3
Press 3/4 to select the setting and then press [MENU/SET].
[Single/Burst
Settings]
[Step]
•
You can take one picture at a time when set to [
•
You can continuously take pictures up to set numbers when set to [
•
Exit the menu after it is set.
•
When taking pictures using Auto Bracket after setting the Exposure Compensation value, the
pictures taken are based on the selected Exposure Compensation value.
Not available in these cases:
•
Auto Bracket is disabled in the following cases.
–
When White Balance Bracket is set.
–
When recording using the flash
–
When recording with [iHandheld Night Shot]
–
When [HDR] is set to [ON]
–
[Multi Exp.]
(P54)
[Rec] > [Auto Bracket]
[
] (single)
[
] (burst)
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
[Sequence]
].
117
[0/`/_]
[`/0/_]
].