Reducing The Long Shutter Noise ([Long Shtr Nr]); Correcting The Brightness On The Screen Periphery ([Shading Comp.]) - Panasonic Lumix DMC-GH4 Owner's Manual

5. Picture Quality and Color Tone Settings

Reducing the long shutter noise ([Long Shtr NR])

Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
> [Rec] > [Long Shtr NR]
MENU
Settings: [ON]/[OFF]
•
[Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
•
We recommend using a tripod when the shutter speed is slowed to take pictures.
Not available in these cases:
•
In the following cases, [Long Shtr NR] does not work:
–
When [Burst Rate] is set to [SH]
–
When [Electronic Shutter] is set to [ON]

Correcting the brightness on the screen periphery ([Shading Comp.])

Applicable modes:
When the screen periphery darkens as a result of the lens characteristics, you can record
pictures with the brightness of the screen periphery corrected.
> [Rec] > [Shading Comp.]
MENU
Settings: [ON]/[OFF]
•
This feature may be automatically disabled, depending on the recording conditions.
•
Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Not available in these cases:
•
Correction is not possible in the following cases:
–
Recording still pictures while recording a motion picture [only when set to [
picture priorities)].
–
When [Burst Rate] is set to [SH].
•
Depending on the lens used, [Shading Comp.] may not operate.
Refer to the website for compatible lenses.
146
] (motion