Panasonic Lumix DMC-GH4 Owner's Manual page 266

10. Using the Wi-Fi/NFC Function
Transferring images stored in the camera easily
A Wi-Fi connection using NFC function is possible by touching the smartphone to this unit,
and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the
¢
smartphone of your family or friend.
¢ Installing the "Image App" is required for use.
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
•
Set [Touch Sharing] to [ON].
1
Play back the picture in the camera.
2
Launch "Image App" on the smartphone.
3
While [ ] is displayed on the connection
screen of the "Image App", touch the
smartphone to [
•
It may take time to complete the connection.
•
If a connection attempt by touching fails, restart
the "Image App", and then display the screen in
2
step again.
•
To transfer more than one image, repeat steps
1 3
and .
(They cannot be transferred as a batch.)
•
Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
(P302)
(P303)
] of the camera.
266
(On your smartphone)
•
Check that your smartphone is a compatible
model.
•
Turn on the Wi-Fi function.
•
Install the "Image App" in advance. (P258)