HP Omnibook XT6050 Service Manual page 87

Security Menu
User Password is
Administrator Password is
Set User Password
Set Administrator
Password
Smart Card Security
Password Required to
Boot
Internal hard disk drive
lock
Removable Device Boot
Power Menu
Backlight Control
Auto Suspend on Undock*
Auto Turn-On on Dock*
Boot Menu
+Hard Disk
+Removable Device
CD-ROM/DVD Drive
Internal NIC
Exit Menu
Save Changes and Exit
Discard Changes and Exit
Get Default Values
Load Previous Values
Save Changes
HP Omnibook XT6050, XT/VT6200
Description
Shows if a user password is set.
Shows if an administrator password is set.
Press Enter to set, change, or clear the user password. The
password can have no more than 8 characters (0-9, A-Z), and
cannot include special or accented characters.
Press Enter to set, change, or clear the administrator
password, which protects BIOS Setup settings. The password
can have no more than 8 characters (0-9, A-Z), and cannot
include special or accented characters.
Enables Smart Card user validation instead of the password
scheme. This field appears only if Smart Card Security has
been enabled by HP Smart Card software in Windows.
Sets whether a user password is required when the computer
boots. Requires the administrator password for changes.
Encodes the current user password (or administrator
password if that is the only password set) on the hard disk
drive.
Sets whether the computer will attempt to boot from a floppy
drive or other removable device.
Description
When switching to battery power, sets whether the display
brightness reverts to the previous battery-power brightness
(Auto Restore) or to a very low brightness to save power
(Auto Dim).
Sets whether the computer suspends to Standby power mode
after undocking.
Sets whether the computer turns on after docking.
Description
Shows the order of boot devices, with "+" indicating a device
category. Move the entries to change the order. If the
computer has more than one device in a category, you can
select the one scanned. Internal NIC provides diskless boot
from a network server.
Description
Saves Setup changes, then exits and reboots.
Discards any Setup changes made since last save, then exits
and reboots. Does not affect password, date, or time changes.
Restores default settings, and remains in Setup. Does not
affect password, date, or time changes.
Discards any Setup changes made since last save, and
remains in Setup. Does not affect password, date, or time
changes.
Saves Setup changes, and remains in Setup. Security
settings are saved when changed.
Troubleshooting and Diagnostics
Default
Clear
Clear
Enter
Enter
Enabled
Enabled
Disabled
Enabled
Default
Auto Restore
When Lid Closed
Enabled
Default
1. Hard Disk
2. Removable
Device
3. CD-ROM/
DVD drive
4. Internal NIC
3-31