Figure 2-16. Removing The Motherboard - HP Omnibook XT6050 Service Manual

Caution: Wireless Models
Be careful when removing and attaching antenna cables. Damage to cables or connectors can
degrade performance.
5. Wireless models only: Disconnect the front antenna PCA flex cable from the motherboard.
6. Wireless models only: Remove the mini-PCI cover and unplug the two antenna cables from mini-
PCI card #1.
7. Lift the motherboard out of the bottom case.
Screws, M2x15mm (2)
Screw, M2.5x3mm
Screw, M2.5x4mm
Front antenna PCA
flex cable
8. Depending on what you are replacing, go to "Replacing the Motherboard" on page 2-26, or
"Replacing the Bottom Case" on page 2-28.
2-24 Removal and Replacement
Screw, M2x3mm

Figure 2-16. Removing the Motherboard

Screw, M2.5x4mm
HP Omnibook XT6050, XT/VT6200