Advertisement
Océ Arizona
• Piezoelectric inkjet with 504 nozzles per
Writing Technology
color, six colors (Black, Cyan, Light
Cyan, Magenta, Light Magenta, Yellow)
• 600 dpi apparent (309 dpi addressable)
Resolution
• Up to 16.7 m
Print Speed / Mode
4-pass mode
• Up to 8.4 m
mode
• Ensures highest dot placement accuracy
Linear Encoders
• Uses an intermediate reservoir, enabling
Hot Swap Ink Delivery
ink bottles to be swapped without
stopping the printer
• Built in drying system ensures prints are
High Speed
ready for immediate application
Drying System
• Océ ColorBlend
Color Handling
smoothness and increased detail in light
to mid-tone colors
• Océ Arizona T220 Inks for most
Inks
applications, packaged in 0.95 liter
(32 oz) bottles
• Océ T220 Industrial Application Inks for
backlit acrylic and thermoformed signage
applications, packaged in one liter
(33.8 oz) bottles
• Ink sets available in Black, Cyan, Light
Printing for
Professionals
T220 System data
®
2
2
(180 ft
) per hour in
2
2
(90 ft
) per hour in 8-pass
®
technology for overall
For information and services, visit us at www.oce.com
© 2006 Océ Display Graphics Systems, Inc. Output may vary depending on type of print data/file, application, media, environmental conditions,
print speed, or other variables. Many of these variables are under the control of the operator, to optimize production and output quality requirements.
Only approved consumables purchased from Océ Display Graphics Systems or authorized distributors, and designated for use in this printer, are
warranted for use in this printer. Illustrations and specifications do not necessarily apply to the standard version of machines in all local markets.
Technical specifications subject to change without prior notice. All products mentioned in this brochure are claimed as trademarks or registered
trademarks of their respective companies.
Cyan, Magenta, Light Magenta and
Yellow; solvent-based pigmented inks
• Onyx Graphics Workflow Software V6.0
Image Processing
or greater, available as an option
• Type: Variety of coated or uncoated rigid
Media
or flexible substrates
• Handling: flat, cut-sheet direct imaging
process
• Max. Media Size:
157.5 cm W x 304.8 cm L x 5.1 cm T
(62" W x 120" L x 2" T)
• Max. Image Size:
158.7 cm W x 306.1 cm L
(62.5" W x 120.5" L)
• SCSI-2 for long length (12 m / 40 ft)
Connectivity
communications; Ethernet TCP/IP;
Centronics Parallel; RS-232 Serial port
• Printer: 230VAC, 30 amps, three phase,
Electrical Requirements
47-63 Hz, dedicated circuit, 24-hour
service
• Vacuum Pump: 230 VAC, 30 amps,
three phase, 50-60 Hz
• 70 psi pressure, 1 cfm minimum flow;
Compressed Air
must flow through air preparation
unit with the following:
• 5 micron element c/w auto drain
coalescing filter with 99.97% efficiency
c/w auto drain regulator c/w gauge
• Total Footprint:
Physical
305 cm W x 122 cm H x 426 cm L
(120" W x 48" H x 168" L)
• Vacuum Pump:
approx. 61 cm W x 61 cm H x 61 cm L
(approx. 24" W x 24" H x 24" L)
• Weight:
approx. 816.5 kg (1,800 lbs)
2 / 2
Advertisement
