Voice Prompts; New Message Indication; Turn Alert On Or Off - AT&T SynJ SB67108 User Manual

Answering system
Setting your system to automatically answer calls
NOTE: You cannot record an announcement when the telephone system is out of
space. You will hear a two-beep alert tone and voice prompt "Memory is full." Please
refer to Remaining space in the SynJ SB67118/SB67138 telephone base manual.

Voice prompts

The system provides voice prompts to guide you through the
setup procedures.

New message indication

When you have new messages in the handset
mailbox, the screen displays New messages.
In addition, the M.box softkey and the new message
indicator flash.
If the notify alert is turned on (pages 20-21), you will receive a phone
call at the telephone number you chose each time a new message
has been recorded.
There is no new message indication on the handset when messages
are left in the general mailbox.

Turn alert on or off

1. When the handset is idle, press MENU
DIR or CID
2. Press
�ENTER.
Press
MENU
DIR or CID
3. Press
�ENTER.
Press
MENU
DIR or CID
4. Press
5. Press DIR or CID
6. Press �ENTER to save the setting and return to the previous
MENU
menu. There is a confirmation tone. To exit without making
changes, press
NOTE: If you try to set Alert on�off before you enter the Alert call # (see page 21),
Please set alert # appears on the screen.
to scroll to Mailbox setup.
to scroll to Notify alert.
to scroll to Alert on�off. Press
to select On or Off.
�CLEAR.
OFF
58
1:Handset 1
New messages
12:00PM 12/31
.
�ENTER
Alert number
Alert on/off Alert on/off
Calling alert #
M.box CID
Back
�ENTER.
MENU