AT&T SynJ SB67108 User Manual page 27

Getting started
Mailbox setup
1. When the handset is idle, press MENU
DIR or CID
2. Press
�ENTER.
Press
MENU
3. Press DIR or CID
Press �ENTER.
MENU
Set alert number:
�ENTER to select Alert call #.
1. Press
MENU
2. Use the dial pad to enter the telephone number
(up to 32 digits) you want to receive the notify alert.
• Press or
• Press
OFF
•
Press and hold
3. Press �ENTER to save the setting and return to the previous
MENU
menu. There is a confirmation tone. To exit without making changes,
press OFF�
Turn alert on or off:
DIR or CID
1. Press
2. Press DIR or CID
�ENTER to save the setting and return
3. Press
MENU
to the previous menu. There is a confirmation
tone. To exit without making changes, press
�CLEAR.
OFF
Call alert confirmation:
You can confirm whether the system can
successfully call the alert number that you entered.
1. Press DIR or CID
Press �ENTER.
MENU
2. The screen displays Press PHONE or SPKR to
confirm alert call.
PHONE�
3. Press
phone confirms that the setup of the Alert number is correct.
4. After confirming that the call went to the telephone number you
specified, press
NOTE: If you try to set If you try to set Alert on�off before you enter the Alert call #, Please set
alert # appears on the screen.
to scroll to Mailbox setup.
to scroll to Notify alert.
to move the cursor to the left or right.
�CLEAR to backspace and delete characters.
�CLEAR to delete all characters.
OFF
.
CLEAR
to scroll to Alert on�off. Press
to select On or Off.
to scroll to Calling alert #.
or
FLASH
�CLEAR to end the test. The idle screen appears.
OFF
�ENTER
�SPKR. The ringing of the designated
21
.
Set access code
Notify alert
Notify alert
Back
Alert call # Alert number
Alert on/off
Calling alert #
Back
�ENTER.
MENU
Alert number
Alert on/off Alert on/off
Calling alert #
Back
Alert call #
Alert on/off
Calling alert #
Calling alert #
Back