To Register A Handset To Your Synj Sb67138 Telephone Base - AT&T SynJ SB67108 User Manual

Getting started
Add and register handsets
To register a handset to your SynJ SB671�8 telephone base
1. Make sure the handset is out of the charger and the
screen shows Press MENU on BS, sel Registration
& sel Register HS. Then put HS in cradle.
2. On the telephone base, press MENU
3. Scroll down to Registration and press
4. Press
MENU�
5. Place the unregistered handset into the charger.
The telephone base screen shows Registering
new device... It takes up to
complete the registration. There is a beep sound
when the registration is successful. The telephone
base shows Handset registered and then the
handset shows X:Handset X (X represents the
extension number [1-0]; Handset X represents
the default handset name).
NOTES:
1. If the registration is not successful, the screen shows Press
MENU on BS, sel Registration & sel Register HS. Then put HS in cradle. To reset
the handset, remove the handset from the charger. Try the registration process
again.
2. Please make sure to remove all unregistered system handsets or cordless headsets
from the chargers before registering a new handset.
ENTER again to select Register HS.
�ENTER.
MENU�
60 seconds to
9
COVM
Speed dial setup
Customer support
Registration
>
Register HS
>
ENTER.
Deregistration
Registering
new device...
Handset
registered
2:Handset 2
Set date & time
Charging