BAYweb BW-WT2 Owner's Manual page 8

Your existing installation is should be
similar to this depiction.
You have a single thermostat cable
going between your wall mounted
thermostat and the furnace.
The cable contains from 2 to 5 wires of
different colors.
Your BAYweb Thermostat installation is shown below. The Control Module is mounted near
the furnace or air conditioner and is wired into the existing thermostat cable. The control
module is powered from a standard outlet.
The specific installation steps to replace your existing thermostat with the new BAYweb
Thermostat are shown in the remainder of the installation instructions. If you are installing the
thermostat with new equipment, the process will be similar except for removal of the old
equipment.
CAUTION: Be sure to review all of the installation steps before starting your
!
installation.
Thermostat Cable
Thermostat Cable
Thermostat Cable
5