Problem
Wireless occupancy sensor not working.
Wired alert input not working.
Control module not connecting to Internet,
Uplink light does not come on.
Heat or Cool does not turn off.
Solution
✔ Verify the X10 ID settings – see the
settings page.
✔ Verify the X10 ID settings of the sensor,
refer to the instructions provided with
the sensor.
✔ Check that the Wireless light on the
Control Module turns ON when the
sensor is activated.
✔ Try adjusting/moving the antenna wire.
✔ Verify the wired input settings – see the
Settings page.
✔ Verify that the green LED on the LAN
connector (on the side of the Control
Module) is illuminated.
✔ Verify that the amber LED on the LAN
connector is blinking.
✔ Plug a laptop or PC into the connection
you are using for the thermostat and
verify that you can browse the Internet.
✔ The Heat or Cool outputs will stay on
for a minimum time period (default of 1
minute).
25