Configure The Thermostat - BAYweb BW-WT2 Owner's Manual

5

Configure the Thermostat

The thermostat is configured using the BAYweb web site. The following steps will guide you
through setting up your web site account and configuring the thermostat. If you have already
setup your account, simply click on the "Devices" link to add the thermostat.
A) Go to the BAYweb site by entering
browser.
B) Click on the "Create an account" link.
C) Enter the requested information.
D) You will be sent an email to confirm you have entered a valid email address and
validate your identity with the given email. You must follow the instructions in the email
to activate your account.
E) Once your account has been activated, login to the web site at
your user ID and password.
F) After logging in, click on the "Devices" link.
G) Click the "Add" button on the Devices page.
H) Enter the serial number and key code from the label on the Control Module.
I) When prompted for the "System Type", enter the type you determined in installation
step 1E. Once this is complete, the thermostat is configured for your specific
equipment.
www.bayweb.com
12
in the address bar of your web
www.bayweb.com using