Advertisement
●
When the smoothie blender is
connected to the power supply with
the assembled goblet in place, the
off button will illuminate indicating
that the unit is ready for use. When
a function button is selected the
illumination will change from the off
button to the button selected and
then transfer back to the off button
when switched off.
10 Press speed ' ' and allow to mix for
up to 30 seconds, this is to start the
mixing process, then press speed
' '. Allow the ingredients to blend
until smooth.
●
Use the stirrer by moving it in an anti
clockwise direction.
11 Press the off button to switch off.
12 Place a glass underneath the tap,
press the dispensing button and pull
forward the dispensing tap lever.
●
Thinner drinks may dispense without
having to use the dispensing button.
●
Use the stirrer to assist when
dispensing thick smoothie drinks.
●
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
13 When the glass is full, switch off and
release the tap lever. Unplug after
use.
OR
Switch off, remove the goblet and
pour the drink. Unplug after use.
hints
●
To make a thinner smoothie drink
add more liquid.
●
To make a thicker smoothie drink
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
●
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
●
Use the pulse button to operate the
power unit in a start stop action to
control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
●
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
●
Some drinks may separate on
standing, therefore, it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
●
Never blend more than the
maximum capacity marked on the
goblet.
●
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
●
Don't use the Smoothie Blender as
a storage container. Keep it empty
before and after use.
●
Some liquids increase in volume and
froth during blending e.g. milk, so do
not overfill and ensure the lid is
correctly fitted.
●
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 60 seconds.
●
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the goblet.
care & cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
the blade unit.
●
Always wash immediately after use.
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult.
●
Don't wash the sealing ring, tap
assembly or blade assembly in the
dishwasher.
4
Advertisement
