before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 13A approved (BS1362) fuse.
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
Wash the parts: see 'care &
tap assembly - tap lever
off button (O)
pulse button (P)
speed ' ' button
speed ' ' button
to use your smoothie
1 Fit the sealing ring into the blade
2 Screw the goblet onto the blade
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position
4 Place the assembled goblet on the
5 Place the liquid ingredients into the
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked 'liquids' for either 3 or 6
6 Add ice or frozen ingredients to the
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
'frozen ingredients' for the
corresponding number of servings.
7 Push the lid onto the goblet.
8 Either push the cap into the lid or
place the stirrer in the hole.
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen foods with
liquids are used.
9 Plug in.
- tap body