Dismantle the tap and clean the
parts thoroughly after every use.
Smoothie Blender unit
Before dismantling the Smoothie
Blender, half fill the goblet with warm
water. Fit the lid and stirrer then
place on the power unit. Press
speed ' ' and whilst running open
the tap and allow the water to drain
into a container to clean the valve.
This can be repeated until the water
Wipe with a damp cloth, then dry.
1 Remove and wash the sealing ring.
2 Don't touch the sharp blades - brush
them clean using hot soapy water,
then rinse thoroughly under the tap.
Don't immerse the blade assembly in
3 Leave to dry upside down away from
goblet, lid, cap and stirrer
Wash by hand, rinse with clean
water then dry.
cleaning the tap
1 Unscrew the tap assembly from the
2 Dismantle the tap by unscrewing the
tap lever from the tap body
not remove the white plastic
component of the assembly.
3 Wash the components then rinse
and dry thoroughly.
4 Reassemble the tap by reversing the
5 Refit the tap to the goblet ensuring
that the seals are correctly
positioned on the goblet
service and customer
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
If you need help with:
using your appliance or
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood Customer Care on
023 92392333. Have your
model number ready - it's
located on the underside of the
spares and attachments
call 0870 2413653.
Contact the shop where you bought
Designed and engineered by
Kenwood in the UK.
Made in China.