Assembly - Stairmaster SC916 Assembly Manual

Step 1: Removing Box
Tools
• Box knife or Strap Cutters
• Claw hammer
1-1 Use the box knife to cut and remove the plastic
banding straps from around the pallet and carton
(see Figure 1) .
Use extreme Caution when using shears or a razor
knife. Always cut away from the body to avoid
cutting yourself.
1-2 Use claw hammer to remove staples from the bottom
of the carton.
1-3 Carefully lift the outer carton up and over the SC 916
(see Figure 2).
Step 2: Removing Handrails
2-1 Grasp the exposed end of the SC 916 handrail. Lift
upward and remove the cardboard support.
2-2 With both hands, carefully lift the handrail and
remove from the box (see Figure 3).
2-3 Repeat the process to remove the handrail from the
other side .

Assembly

6
Assembly Manual
Figure 1
Figure 2
Figure 3