Stairmaster SC916 Assembly Manual page 12

Step 10: Replacing the Leg Levelers
10-1 Replace the 2 leg levelers previously removed in
Step 9 and 2 lock washers (see Figure 19).
10-2 Return the SC 916 to its upright position.
Step 11: Attaching the Console
Tools
• Phillips screwdriver
11-1 Grasp the SC 916 console and connect the CHR
cable from the upper mast weldment to P3 on the
PC board (see Figure 20).
11-2 Connect the telemetry Heart Rate cable from the
mast to J6 (Polar HR) connector on the PC board
(see Figure 20).
11-3 Connect the Main cable from the mast to the 20-pin
connector on the PC board (see Figures 20).
11-3 Secure the console with the 4 Phillips screws
remove previously (see Figure 21).
Step 12: Attaching the Covers
Tools
• Phillips screwdriver
12-1 Reattach the left and right side covers using the
phillips screws removed in Step 5.
12-2 Reattach the mid cover using the phillips screws
removed in Step 5.
NOTE: If installing the optional NV915 television, refer to
the M-series Installation Manual at this time.
Assembly
12
Assembly Manual
Figure 19
J6 Polar HR
20 Pin Connector
Contact Heart Rate (CHR)
Figure 20
Figure 21