Stairmaster SC916 Assembly Manual page 10

Step 7: Routing Main Cables
7-1 Route the Main cable located at the top of the lower
mast through the bottom of the upper mast weldment
and exit out the console plate (see Figure 12).
7-2 Secure the Main cable with the CHR and Polar
cables to the console plate.
Step 8: Attaching Masts, Upper and
Lower
Tools
• 9/16" or 14 mm wrench or socket
8-1 Secure the upper mast weldment to the lower main
body utilizing the 4 supplied bolts, lock washers, and
flat washers using a 9/16" or 14mm wrench or socket
(see Figure 13 and 14).
10
Assembly Manual
Top of Upper Mast
Figure 12
Figure 13
Figure 14