Toyota Prius ZVW35 Series Dismantling Manual page 70

25. Remove No. 1 hybrid vehicle battery shield
panel.
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Disengage the 2 claws and remove the 3
clamps and electrical key oscillator.
(2) Disconnect the connector and clamp.
(3) Remove the 7 nuts and No. 1 hybrid vehicle
battery shield panel.
26. Separate electric vehicle charger wire.
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Disconnect the connector.
Notice:
Insulate the terminals of the removed frame
wire with insulating tape.
27. Disconnect frame wire
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Using an insulated tool, remove the 2 nuts.
(2) Disconnect the shielded wire ground and frame
wire.
Notice:
Insulate the terminals of the removed frame
wire with insulating tape.
28. Remove the No. 1 hybrid battery intake duct.
(1) Remove the clip and No. 1 hybrid battery
intake duct.
65