Toyota Prius ZVW35 Series Dismantling Manual page 27

8. Remove the 3 service plug grips.
Caution:
•
Wear insulated gloves.
•
Before inspecting or servicing the high-voltage system or disconnecting the low
voltage connector of the inverter with converter assembly, be sure to follow all
safety measures, such as wearing insulated gloves and removing the 3 service
plug grips to prevent electrocution. After removing the 3 service plug grips, carry
one of the 3 service plug grips in your pocket to prevent other technicians from
accidentally reconnecting it while you are servicing the vehicle. Keep the other 2
service plug grips in a secure place.
•
High voltage wiring connectors are colored in orange.
(1) Slide the handle of the service plug grip to the left.
(2) Raise the release handle of the service plug grip as shown in the illustration below.
(3) Remove the service plug grip.
(4) Apply insulating tape to the socket of the service plug grip to insulate it.
22