Toyota Prius ZVW35 Series Dismantling Manual page 35

29. Remove the HV battery cover sub-assembly.
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Separate the 2 claws and 3 clamps, and remove
the indoor electrical key oscillator.
(2) Remove the 18 nuts and HV battery cover
sub-assembly.
30. Disconnect the frame wire.
Caution:
Be sure to wear insulated gloves and
protective goggles.
Notice:
Insulate the terminals of the removed frame wire
with insulating tape.
(1) Remove the 5 nuts and disconnect the frame wire
from the hybrid junction block assembly.
(2) Disengage the clamp, remove the nut and
disconnect the frame wire from the hybrid vehicle
converter.
(3) Disconnect the connector to disconnect the frame
wire from the hybrid battery charge relay.
(4) Remove the 2 nuts and frame wire from the
hybrid battery.
30
Front