Toyota Prius ZVW35 Series Dismantling Manual page 37

33. Install HV battery cover sub-assembly.
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Temporarily install the HV battery cover
sub-assembly with the 18 nuts to prevent any
foreign objects or water from entering the HV
battery.
34. Remove the HV battery.
Caution:
Be sure to wear insulated gloves and
protective goggles.
Notice:
Insulate the terminals of the removed frame wire with insulating tape.
(1) Remove the 2 bolts from each back door damper stay bracket UPR.
Hint:
Have an assistant support the back door.
(2) Rotate each back door damper stay bracket UPR upside-down as shown in the illustration and
install them with the 2 bolts.
Hint:
This step is performed to provide additional clearance and prevent interference between the
vehicle body and mini crane when removing or installing the HV battery.
32
Front