Honda H2013 Operator's Manual page 30

SB2040 Snowblower
When removing snow, do not use the snowblower as a dozer blade to push snow. Let the snowblower
works its way through deep drifts. If the travel speed of the lawn tractor is too fast, the snowblower may
become overloaded and clog. For best results, raise the snowblower and remove a top layer of snow. A
second pass will remove the remaining snow.
Always operate the lawn tractor with the throttle set to
performance and clog the discharge chute.
POP
521 52 (961 0)
You can be seriously injured by the fan or
auger blades.
The blades spin and can cut or amputate your
hand or fingers.
Never attempt to clear a clog with your hand;
always use a stick at least 36" in length to clear
a clogged discharge chute or auger.
(FAST). Using other throttle settings can reduce
Safety Recommendations
29