Check Belt Routing Path
1. Move the PTO clutch lever to ON. Verify the belt has been routed as shown.
Check Belt Guards and Gap
Inspect the four belt guards on the PTO
clutch assembly. Verify each guard is
positiioned as shown.
Check the spacing between the the two
pulleys and the four belt guards. Verify
there is a gap of 1/8 - 3/16"
18
ENGINE CRANKSHAFT PULLEY
TWIST IN BELT ON
RIGHT SIDE PULLE
(3
-5 mm).
FIXED (LEFT SIDE) PULLEY
-
20
23
ft-lb.
-
31 Nrn)
(27
SB2040 Snowblower
RIGHT SIDE
\\- -
REAR VIEW
MOVEABLE (RIGHT SIDE) PULLEY
POP
52152 (9610)