Connecting Wires To Terminals; Rear View Camera - Kenwood KIV-BT901 Instruction Manual

Connecting Wires to Terminals

Do not remove the cap when you do
⁄
not use the USB cable. The connector
USB device
will cause the unit to malfunction if it
(commercially
gets in touch with any metallic part
available)
of the vehicle.
iPod
(commercially
USB connector
available)
(1m (3.2 ft))
KCA-iP202
(option)
Rear View Camera Input
("R-CAM Interruption"
page 30)
Microphone input
(KIV-BT901 only)
Microphone
(Accessory 7)
(KIV-BT901 only)
Wiring harness (Accessory 1)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Blue/White
(Power control wire)
Blue
(Antenna control wire)
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote control wire)
Orange / White
(Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire) · (To car chassis)
80
|
KIV-BT901/ KIV-701
Light Green (Parking sensor wire)
CA-U1EX
(option)
Purple/White (Reverse sensor wire)
Fuse (10A)
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
When using the optional power amplifier, connect to its power control
P.CONT
terminal.
Depending on what antenna you are using, connect either to the control
ANT.
terminal of the motor antenna, or to the power terminal for the booster
CONT
amplifier of the film-type or short pole type antenna.
To connect the Kenwood navigation system, consult your navigation
MUTE
manual.
Connect to the terminal that is grounded when either the telephone
⁄
rings or during conversation. (KIV-701 only)
To use the steering wheel remote control feature, you need to an exclusive
REMOTE CONT.
remote adapter (not supplied) matches your car is required.
STEERING WHEEL
REMOTE INPUT
To car light control switch
ILLUMI
For the sake of safety, be sure to connect the
parking sensor.
Connect to the vehicle's parking brake
⁄
detection switch harness.
Light Green
(Accessory 3)
Connect to vehicle's reverse lamp
harness when using the optional
Purple/White

rear view camera.

(Accessory 4)
iPod audio output
iPod visual output
Rear output
R L
Front output
Sub Woofer output
FM/AM antenna input (JASO)
L
R
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) which
is stereo type and does not have any
resistance.
To Kenwood disc changer/External optional
accessory
To connect these leads, refer to the
⁄
relevant instruction manuals.
If no connections are made, do not
let the wire come out from the tab.
Ignition key switch
ACC
Car fuse box
("AV Out Set" page 43)
("AV Out Set" page 43)
Antenna Cord
Car fuse box
(Main fuse)
Battery