Chapter Ii: System And Network Setup; Build Network Connection - Hawking HWABN25 User Manual

Chapter II: System and Network Setup

2-1 Build Network Connection

Please follow the following instructions to build the network connection between your
new HWABN25 Hi-Gain™ Wireless-300N Multi-Function Extender Pro and your
computers and other network devices:
1. Connect the A/C power adapter to the wall socket, and then connect it to the 'Power'
socket of HWABN25 located on the bottom of the unit. You may need to remove
the back panel on the HWABN25 to get to this power socket.
2. Connect your HWABN25's LAN port to an Ethernet cable. You can plug the other
end into your computer. If you have a wireless device, you can also connect to the
wireless network "Hawking_HWABN25".
.
3. Log into the setup page to configure the HWABN25. See section 2.3
14